JM14

JM14

JM14 mini jet engine kit is a light jet engine which can produce 14 lbs of thrust and has an extremely efficient thrust to weight ratio of 6.54.

This engine boasts sufficient power for use in an RC jet aircraft, and it can be upgraded with a FADEC / AutoStart kit

Compared to other products, this engine is easier to build, which help you focus more on the integration side

Start Your JM14 Journey
  • Aerospace Principles

    Dive into on real-world applications. The JM14 allows you a fast build so you can focus on experimenting with your application

    ✅ System integration experience

    ✅ Experiment with FADEC

    ✅ Practical installations

  • Technical Skills

    JM14 is designed for quick build and electronics interoperability

    ✅ Build a jet engine

    ✅ Integrate into RC Vehicles

    ✅ Experiment with electronics

  • Real-World Applications

    Develop a deeper understanding of aerospace engineering principles through hands-on application and experimentation.

    ✅ Thrust optimization

    ✅ Fuel efficiency analysis

    ✅ Performance tuning

1 of 3

Your Building Journey

  • Estimated Time Commitment

    JM14 typically requires 5-7 hours to complete*, spread over 1-2 weeks for most builders. The pace is flexible and can be adjusted to your schedule and experience level.

    *Does not include integration time

  • Skill Development

    After building JM14, You will learn how to integrate it in different applications, in addition to electronics integration and configuration

  • Support Resources

    Throughout your journey, you'll have access to detailed instructions, video tutorials, our active community forum, and direct technical support from our team.

Technical Specifications

General

  • Engine Type: Single-stage centrifugal turbojet
  • Fuel Type: Jet-A, Kerosene
  • Lubricant: Turbine oil 3%-5%
  • Starting System: Electric starter with soft-start capability

Performance

  • Maximum Thrust: 14 lbs / 6.3 Kg / 62.2 N
  • Idle RPM: 43,000 RPM
  • Maximum RPM 160,000 RPM
  • Exhaust Gas Temperature: 1256°F / 680°C
  • Fuel Consumption: 7 oz/min / 200 ml/min at full throttle

Physical

  • Weight: 2.14 lbs (0.97 Kg)
  • Length: 6.59" / 165 mm (9" / 230 mm with starter)
  • Diameter: 3.54" / 90 mm

Deliverables

Kit content:

  • Turbine wheel
  • Compressor wheel
  • Axle shaft
  • Housing
  • Axle hub
  • Screws
  • Fuel system
  • Pre-built combustor
  • Nozzle guide vanes
  • Entry nozzle
  • Bearings
  • Front and rear nuts
  • Misc hardware

Build guide

JM14 Build Guide


Community:

  • 1 month subscription included

Not included:

  • Electric starter (sold separately)
  • Electronics (sold separately)

Required tools (Not included):

  • Safety equipment (gloves, eye protection)
  • Philips screwdriver
  • Drill and drill bits
  • Bench vise
  • Small files and deburring tools
Buy JM14 Now !

FAQ

What maintenance does the JM14 require?

Regular maintenance includes:

  • Visual inspection before each use
  • Cleaning of the fuel filter every 10 operating hours
  • Inspection of all fuel lines and connections monthly
  • Lubrication of bearings according to the schedule in the user manual
  • Annual inspection of the turbine blades and combustion chamber

Is JM14 suitable for classroom demonstrations?

JM14 was designed with educational settings in mind. It can be built indoor but we don't recommend operating it in a classroom setting.

Operating a jet engine requires:

  • Adequate ventilation
  • Proper safety barriers
  • Hearing protection for observers
  • Adherence to safety protocols
  • Adult supervision and proper training for the operator

Please refer to the safety notice for more safety recommendations

Can children operate the JM14?

No. JM14 is not a toy and should only be operated by adults with proper training and understanding of the safety protocols. Children may observe demonstrations or control RC vehicles under close adult supervision while maintaining a safe distance from the unit.

What's the main difference between JM14 and JM50?

JM50 is harder to build offering you more knowledge on the engine building side compared to application side. JM14 is easier to build and offers the possibility to experiment with electronics and application.

Do I have to be subscribed to the community to access learning resources ?

The Build Guide is provided to you with the purchase of the product. Extra learning resources are available exclusively through the community. You get 1 month free subscription with the purchase of your engine

Skip to product information
1 of 1

JM14

JM14

Regular price $1,683.00 CAD
Regular price Sale price $1,683.00 CAD
Sale Sold out
Shipping calculated at checkout.
View full details
  • High temperature

    • Never operate near flammable items
    • Never stay behind the engine exhaust
    • Always keep a fire extinguisher close
  • Toxic Exhaust gases

    • Never operated indoor
    • Never stay close to the engine exhaust
    • Always operate in well ventilated areas
  • High speed rotation

    • Never put any object inside a running engine
    • Never touch the internal parts of a running engine with your bare hands
  • Heavy product

    • Always secure the engine and parts
    • Always take safety when handling the engine and engine parts